Recommended Products
5.8GHz Premium Combo
This antenna combo is similar to our pupular “Bundle and Save kit”, the only difference is the transmit antenna is a Pentalobe version 2 antenna.
The Pentalobe offers extra gain and world class quality. You will experience video transmission with no lines and blemishes.
Chat with us on Facebook reguarding your upgrades
https://www.facebook.com/groups/1577806512440602/
and also here
https://www.facebook.com/groups/396477587202912/
Note: Please select the plug you want before adding the product to cart.
RHCP 5.8GHz Parasitic Disk Helix 9.3dBi-Fatshark mount- For 3-4km racing quad
This is a new development for FPV antennas. It’s a 2.75 turns helix, the turns are more closely spaced than a conventional helix, and it uses a parasitic disk to achieve higher gain (9.3dBi) and better axial ratio compared to a regular helix.
The result is a very compact moderately directional antenna with very good efficiency, and same gain as a 3 turns conventional helix. The total length is less than half that of a comparable 3 turns helix, which is slightly more than a linear patch antenna which shines if attached directly to your FPV goggles. The ease of aiming this is unbelievable it feels almost as an omni when flying your course nearby and it becomes slightly directional with very wide beam width when going far. We have taking our racing quad to 3-4km with a 200mw VTX and this antenna.
Note: Please select the plug you want before adding the product to cart.
RHCP 5.8 GHZ tx Pinwheel 90° SMA
A single tx pinwheel for 5.8Ghz. This antenna comes only with a 90° connector, for straight connector please select the proper item in the list. This one works very well with our 5.8 helicals….
After much testing and reports by customers I can say it outperforms most of the cp antennas out there.
Note: Please select the plug you want before adding the product to cart.
RHCP 5.8 GHz Pentalobe V.2 1.9dbi
I developed this new Pentalobe V.2, which is an evolution not a revolution of a OMM optimized pinwheel. WIth slight more pitch angle an an extra lobe, gain and circularity are improved. Also this antenna is a better match to 50ohm compared to the older pentalobe.
Note: Please select the plug you want before adding the product to cart.
Shop
Showing 25–48 of 70 results
-
-
5.8GHz FPV Antennas
LHCP 5.8GHz Pinwheel
This is the LHCP version of the popular 5.8GHz pinwheel.
It is compatible with the white DJI antennas which are LHCP,
Always make sure you do not mix LHCP and RHCP antennas,
as that would result in terrible performance.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-14 -
Phantom 2 Vision +
LHCP 6.5 Turns 12.9dBi
This antenna is LHCP and has a gain of 12.9dBi .
Very popular among Phantom Vision 2 pilots. Mounting it on the wi-fi extender,it allows 1.5km + range with the stock Phantom antennas.It needs to be aimed quite accurately to reach that range.
If used with regular FPV equipment it needs a LHCP pinwheel  on the pantom camera to reach twice that range.
SKU: fpv-01 -
Phantom 2 Vision +
LHCP Phantom V2 Kit X3
X3 as in 3 helix antennas in one.
This is going to offer the most enjoyable solution for unboosted or even double-boosted wi-fi.
Guaranteed below 1.4:1 SWR in the whole operating band.
The new design of this unit also includes a 5.8 GHZ 8 turns helix with 40° beam width.
The 2 Half Sphere helix antennas have a combinded array beam width of 60° [michaelhemy@gmail.com] .Enjoy your 1.5 (unboosted) range with very wide beamwidth.
Or your 4km+ range with double booster (1w sunhans mimo)
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-30 -
DJI LIGHTBRIDGE
Long Range Antenna Kit for Lightbridge
This kit is composed by 2 antennas for the ground unit, one directional (half sphere helix 2.4ghz 9dBi), the other omni-directional 1.7dBi.
Also there are 2 antenans for the Bird side unit, with direct plug-in cables for the 2 black omni directional antennas (pinwheel antennas 1.7dBi).
These should be installed on the bird 90 degrees one for the other.
If installing this on a Phantom  2 we have a perfect antenna mount for  the 2 bird side antennas here
These  Circular polarized antennas will provide more than double stock distanced but most importantly they will allow to keep image delay to a minimum due to verry high data bandwidth even when flying far from the Home location.
SKU: LB-01 -
Tornado, Typhoon H, YUNEEC DRONES ANTENNAS
Long Range KIT
Here is a 10.5 dBi half sphere helix 2.4GHz LHCP and a proprietary FPVLR 9.3DBI parasitic disk helix 5.8ghz LHCP to give you very wide beam width and ease of aiming, yet some very usable directional gain to increase both your video and rc and telemetry about 3x vs stock  antennas.
SKU: n/a -
Mavic Pro Antennas
MAVIC PRO CP ANTENNA KIT
This kit is based on FPVLR Half Sphere Helix V3, orginally designed by Donato Marcantonio at FPVLR and constantly improved.
with 10dBi gain, and true circular polarization these are hard to beat.
They will destroy not only linear polarized kits , but  when amplified they are the only kind of antennas that eliminate cross-talk and provide cleaner video at incredible distances.
Now they are individually tuned and with connector installed directly to the ground plane, they are compact, sturdy and unbeatable in every respect.
Treat your DJI Mavic to the best antenna money can buy.
Quick tip for the novices:
You will see several attempted copies of this antenna around the web, some will claim they use “SILVER” as their winding material and promise magic. This said, don’t be fooled by snake oil. Those antennas do not use a matching network and they are not well matched to 2.4ghz, also “SILVER” has better conductivity than copper which does nothing for the antenna, it just gives higher bandwidth, which is actually bad for this antenna. Once the waves leaver the copper , or silver, or steel antenna the waves have to travel in the”aether”… silver does nothing for propagation of radio waves. This antenna is already extremely wide band as it is. The only reason why the copy-cat people are using silver coated copper is that so they don’t have to scrape enamel on the copper wire at the bottom for the soldering job and they can do that faster without enamel coating. Be smart! Use the best and DO compare ours with any other copies out there.
SKU: n/a -
FPV RF CABLES/CONNECTORS
MMCX to RP-SMA FEMALE adapter cable – New Long SMA connector.
This cable is used to replace the internally connected P2V+ antennas going to the Lightbridge unit inside the Phantom V2+.
It has a mmcx connector on one end and a rp-sma female on the other, allowing you to mount any external antennas to the P2V+.
SKU: cbl-03 -
Racing quad frames
Nero 180
This micro racing quad brings Italian design to quadcopter racing world.
This new company does great work, and is made up of young Italian engineers and engineering students.
We see this becoming the “Ferrari” of the sub 200mm racing quadcopters.
Recommended parts:
MOTORS: 1306 3100kv – DYS – RCX – SUNNYSKY – T MOTOR

ESC: 8/12A –Â DYS SN16AÂ –Â KISS 12A–Â RCTIMER 16A

FC: Naze32Â
FPV CAM: PZ0420M – Aomway 600tvl

VTX: Aomway 5.8 200mw

BATTERY:Â 3S nanotech 950mah lipo
PROPS: HQprop 4045 BULLNOSE –Â FLYDUINOÂ –Â MULTIROTORSUPERSTORE
Gemfan 4045 –Â GLBFor motor and component selections please refer to this rcgroups thread
SKU: Nero-001 -
Boosters/Amps
New FPVLR 3W Bi-Directional Amplifier 2.4Ghz (compare with sunhans)
This wi-fi booster can greatly increas your signal strength. It comes with power adapter.
~~Model Name: FPVLR24V1
Operating Range : 2400~2500 MHz
Operating Mode: Bi-directional, half-duplex, time division duplex senses RF, carrier from transmitter and automatically switch receiving to transmitting mode
Connector Type: SMA Receptacle (50 ohm)
Input Power: 0 ~ 20 dBm
Transmit Gain: 14 – 17dB
Output Power: 4000 mW
Receiver Gain: ≤ 12 dB
Noise Figure: 3.5 dB typical
Frequency Response: ±1dB
Power Adapter: 12V/2A DC, 100~240V for AC Adapter
Operating Temperature: -20°C to + 70°C
Operating Humidity: Up to 75% relative humidity
Material: Cast Aluminum
Booster Weight: 55 gSKU: FPVLR24AMP -
1.2-1.3GHz FPV Antennas
RHCP 1.2 Ghz 7.5 Turn Helix
Our latest addition to the CP antenna line. This antenna kicks butt! Extremely wide band, it will work from 980mhz up to 1280 mhz with SWR being very low at 1080, 1120, 1160 and 1200. It stays below 1.2:1 on all these 4 frequencies, and it stays below 1.6:1 on 980mhz and 1280mhz.Â
This antenna has reached distances up  to 63km and has successfully been used for college balloon launch to the stratosphere.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-26 -
1.2-1.3GHz FPV Antennas
RHCP 1.2-1.3 Ghz Pinwheel 90° SMA
This is a single Pinwheel antenna for 1.2-1.3 ghz.
The one in the picture is for 1280mhz specifically.
Please specify Frequency /Channel  under order notes in checkout.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-23 -
1.2-1.3GHz FPV Antennas
RHCP 1.2-1.3-900 pinwheel set (CRASHPROOF)
This set is good for 1.2-1.3 and even 900mhz frequencies. All you need to do is specify the correct frequency and it will be sized accordingly.
One antenna comes with 90° connector, the other one comes with a straight connector. If you need both with 90° connectors please select 2 pcs of the single antenna.
All 1.2 pinwheels now incorporate our well proven “CRASHPROOF” system, which consists of a CNC cut copper cross with a hole in the middle. The coaxial cable is inserted in the cross and soldered to it. The “petals” are then soldered to the 4 leads of the cross. A generous amount of epoxy is then poured over and around this solder joint and than the wires are “dipped” in black plasti-dip which is RF transparent  and protects the copper plating of the steel wires.
Please specify Frequency/Channel  under order notes in checkout.
e steel wires.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-22 -
5.8GHz FPV Antennas
RHCP 12 turn 5.8 helical long range antenna
This is a 12 turn antenna for very long flights on the 5.8 frequency.
I have personally gone 10.8Km with this antenna and a 200mw foxtec tx (rc305 rx), using a pinwheel on the tx side.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-11 -
2.4GHz FPV Antennas
RHCP 2.4 Ghz 6.25 turn Helix
For everyday flying on 2.4 we recommend this antenna, it’s good for 15-20 km and it’s very nice with a tracker.
The only antenna you’ll ever need (plus a pinwheel or a pentalobe on the plane).
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-19 -
-
2.4GHz FPV Antennas
RHCP 2.4 pinwheel set (crashproof)
Buy them as a set and SAVE. One pinwheel comes with 90° connector, the other with a straight connector. If you need both 90° connectors please choose 2 pcs of the single antenna. Please specify Frequency / Channel  under order notes in checkout.
This set will incorporate the new CRASHPROOF system, which consists of a copper cross cnc cut with a hole in the middle, soldered around the coax sheeting and to the bottom legs of the antenna. This will allow the antenna to withstand most crashes with little to no damage.
Guaranteed swr between 1.2:1 – 1.3:1 on chosen channel.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-20 -
2.4GHz FPV Antennas
RHCP 2.4GHZ 14.5db 12 turn Helical
This antenna is a fantastic long range antenna. Our customers have reached great distances with exceptional video quality, even at low altitude.
10km at 10 meters altitutde is possible with this antenna and a matching Pinwheel on the plane, or 20-30 km are possible with much more altitude (around 1000 meters)
Click on the picture to select your exact frequency and connector before adding to cart.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-15 -
2.4GHz FPV Antennas
RHCP 2.4ghz 7.5-9db Helical 4.25 turns
This is a great light and compact everyday antenna. With 7.5- 9 dbi gain it’s a great compromise when space is a problem. The antenna has been tested to 14km* (*using 500mw lawmate tx and lawmate rx with saw filter mod), and so it should be good for most pilots who just need to do Aerial Video and/or Photography at distances around 8-10 km in total safety
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-18
