This simple kit will allow your Phantom Vision 2 and 2+ to travel 2x to 3x as far as stock, retaining full FPV.
For installation please refer to this guide:
This simple kit will allow your Phantom Vision 2 and 2+ to travel 2x to 3x as far as stock, retaining full FPV.
For installation please refer to this guide:
$119.00
This simple kit will allow your Phantom Vision 2 and 2+ to travel 2x to 3x as far as stock, retaining full FPV.
For installation please refer to this guide:
This is the 2.4 GHz version of our parasitic disk helix, this is also LHCP to match the LHCP patch antennas on the Phantom Vision 2. Gain is between 9 and 10 dBi, despite the small form factor.
The antenna allows a maximum distance of 1.3km in FPV mode with the Phantom going away from you.
For best performance, a matching LHCP pinwheel can be ordered.
X3 as in 3 helix antennas in one.
This is going to offer the most enjoyable solution for unboosted or even double-boosted wi-fi.
Guaranteed below 1.4:1 SWR in the whole operating band.
The new design of this unit also includes a 5.8 GHZ 8 turns helix with 40° beam width.
The 2 Half Sphere helix antennas have a combinded array beam width of 60° [michaelhemy@gmail.com] .
Enjoy your 1.5 (unboosted) range with very wide beamwidth.
Or your 4km+ range with double booster (1w sunhans mimo)
Note: Please select the plug you want before adding the product to cart.
*New Version 01-27-2015″
This kit contains EVERYTHING from stage 3 so in total you get
– stage 3
– 2.4GHz 2.5W amplifier
– 5.8GHz 2W amplifier
– 3000mah batttery with 2 leads to power both amps.
You can follow us on these Facebook groups
Phantom 3 and Long Range FPV Mods
~~These amplifier products are available for export, military, licensed amateur radio and OEM component sales
This is the latest addition to our CP Helix series. Gain is a healthy 9dBi, but what makes it shine is small form factor. You are not going to find a smaller form factor CP antenna of this gain. This makes it well suited for feeding a parabolic dish or, when space is a problem, or a handheld application is needed, as is the case of the wi-fi repeater on a Phantom Vision 2.
If you choose a LHCP directional antenna like this one,
you can use it with the STOCK PV2 (which mounts LHCP antennas).
If you want to use this for analog video trasmission please select a LHCP omnidirectional antenna like our LHCP pinwheel to be on the trasmitting side.
Also this antenna needs a U.FL to RP-SMA FEMALE extension cable which we do carry in our store.
Diameter : 7cm (2 3/4″)
Height: 4cm (1 1/2″)
Weight: 50gr


There are no reviews yet.