Recommended Products
5.8GHz Premium Combo
This antenna combo is similar to our pupular “Bundle and Save kit”, the only difference is the transmit antenna is a Pentalobe version 2 antenna.
The Pentalobe offers extra gain and world class quality. You will experience video transmission with no lines and blemishes.
Chat with us on Facebook reguarding your upgrades
https://www.facebook.com/groups/1577806512440602/
and also here
https://www.facebook.com/groups/396477587202912/
Note: Please select the plug you want before adding the product to cart.
RHCP 5.8GHz Parasitic Disk Helix 9.3dBi-Fatshark mount- For 3-4km racing quad
This is a new development for FPV antennas. It’s a 2.75 turns helix, the turns are more closely spaced than a conventional helix, and it uses a parasitic disk to achieve higher gain (9.3dBi) and better axial ratio compared to a regular helix.
The result is a very compact moderately directional antenna with very good efficiency, and same gain as a 3 turns conventional helix. The total length is less than half that of a comparable 3 turns helix, which is slightly more than a linear patch antenna which shines if attached directly to your FPV goggles. The ease of aiming this is unbelievable it feels almost as an omni when flying your course nearby and it becomes slightly directional with very wide beam width when going far. We have taking our racing quad to 3-4km with a 200mw VTX and this antenna.
Note: Please select the plug you want before adding the product to cart.
RHCP 5.8 GHZ tx Pinwheel 90° SMA
A single tx pinwheel for 5.8Ghz. This antenna comes only with a 90° connector, for straight connector please select the proper item in the list. This one works very well with our 5.8 helicals….
After much testing and reports by customers I can say it outperforms most of the cp antennas out there.
Note: Please select the plug you want before adding the product to cart.
RHCP 5.8 GHz Pentalobe V.2 1.9dbi
I developed this new Pentalobe V.2, which is an evolution not a revolution of a OMM optimized pinwheel. WIth slight more pitch angle an an extra lobe, gain and circularity are improved. Also this antenna is a better match to 50ohm compared to the older pentalobe.
Note: Please select the plug you want before adding the product to cart.
Shop
Showing 1–24 of 70 results
-
Batteries
12V dual lead battery 3000mah with charger
This is a purpose-built 12v li-po battery (nominal 11.1), 3000mah, if features 2 barrel plugs 2.1mm outer and 0.7mnm inner diameter in order to power both sunans boosters (2.4GHz and 5.8GHz) it’s very tiny and has a on-off switch, it will give a reliable  2 hour autonomy powering the sunhans 2.5w booster. alone or 1 hour+ powering both 5.8 and 2.4ghz boosters.
It was selected for light weight (115gr) in order to be used on the transmitter. This means that it needs to be charged after 2 flights.
The included charger provides 1A charging current this means that it will take 3 hours to charge it from completely empty and in most cases a couple of hours to top-up.
SKU: Bat-01 -
5.8GHz FPV Antennas
5.8 GHz FPV antenna kit for the Phantom 2 (non vision)
This kit is the same quality of our 5.8GHz bundle, famous worldwide for unparalleled image clarity, top workmanship, unparalleled range and reliability.
Specific to the Phantom 2 since the pinwheel with 90 degrees connector is RP-SMA wich works with all Boscam transmitters and boscam OEM clones.
For pilots using ImmersionRC transmitters go here instead and select sma-male connector option.
The straight antenna and the helix are usually mounted on a Black Pearl monitor with diversity receiver, and have SMA-MALE connectors.***
Center frequency is 5800 so it can be used on all the available band.
***ATTENTION*** please make sure your Black Pearl has SMA FEMALE connector (hole in the middle) before ordering ths kit, and make sure your transmitter has RP-SMA FEMALE (pin in the middle) . We cannot be responsible for mistaken orders and shipping costs back to us in case of mistaken orders are at the customer’s expense.
Note: Please select the plug you want before adding the product to cart.
SKU: kit-004 -
5.8GHz FPV Antennas, Phantom 2 (non vision)
5.8GHz Premium Combo
This antenna combo is similar to our pupular “Bundle and Save kit”, the only difference is the transmit antenna is a Pentalobe version 2 antenna.
The Pentalobe offers extra gain and world class quality. You will experience video transmission with no lines and blemishes.
Chat with us on Facebook reguarding your upgrades
https://www.facebook.com/groups/1577806512440602/
and also here
https://www.facebook.com/groups/396477587202912/
Note: Please select the plug you want before adding the product to cart.
SKU: combo_58 -
Parts, Bits and Pieces
Antenna Mounting Bracket for the Phantom (compatible with P2, PV2, PV2+)
This is a 3D-printed antenna mounting bracket. It’s made with high quality ABS plastic, nice and sturdy, and it fits all Sma female adapters. It’s mounted on the top side of the Phantom Landing Gear, at it’s widest point, and it can be moutend with the hole vertical or horizontal.Â
It needs 2mm machine screws and nuts, which are NOT provided.Â
It is distanced perfecdtly so the antenna is mounted away from the camera gimbal outside the landing gear to the side. This way the coverage will be optimal.
It’s strong enough for any type and amount of flying, but will break in a crash so the expensive antennas are not harmed.
SKU: 3D-01 -
-
Boosters/Amps
FPVLR 5.8ghz 3W booster/amp
This is the ALL NEW 2W 5.8ghz booster/ amplifier by sunhans.
Specifications:
Model Name: SH58Gi2000
Operating Range: 5.15-5.85 GHz
Features: 2000mWatt
Operating Mode: Bi-Directional, TDD
Transmit Gain: 15dB-18dB
RX Gain; 11dB-14dB
Frequency Respose: +/- 1dB
Output Power: 2000 mWatt
TX Input Power: 1mW (0dBM) min up to 100mw (20dBm) max
Receiverr Gain: 12 dB Typical
Noise Figure: 3.5dB Typical
LED Indicators: GREEN: Solid, On:power and receving mode, off: No Power.
BLUE: Blinking: Transmitting
Connectors: Input: SMA-FEMALE, Output: RP-SMA FEMALE.
Lightning Protection: Direct DC GRound at antenna.
DC Surge Protection: 12v1a
Operating Temperature: -40°C  to + 70°C
~~These amplifier products are available only for export, military, licensed amateur radio and OEM component sales and are not offered for general sale within the USA.Â
SKU: S58G3000 -
-
1.2-1.3GHz FPV Antennas
LHCP 1.2GHz Pinwheel
Same gain and performance as our famouse 1.7 dBi Pinwheel, but this is LEFT HAND CIRCULAR POLARIZED (LHCP).
It’s only to be used with other LHCP antennas, and will not work with other brand RHCP offerings.
Note: Please select the plug you want before adding the product to cart.
SKU: n/a -
Phantom 2 Vision +
LHCP 2.4 GHz Parasitic disk helix
This is the 2.4 GHz version of our parasitic disk helix, this is also LHCP to match the LHCP patch antennas on the Phantom Vision 2. Â Gain is between 9 and 10 dBi, despite the small form factor.
The antenna allows a maximum distance of 1.3km in FPV mode with the Phantom going away from you.
For best performance, a matching LHCP pinwheel can be ordered.
SKU: fpv-02 -
Phantom 2 Vision +
LHCP 2.4GHz Half Sphere Helix 9 dBi
This is the latest addition to our CP Helix series. Gain is a healthy 9dBi, but what makes it shine is small form factor. You are not going to find a smaller form factor CP antenna of this gain. This makes it well suited for feeding a parabolic dish or, when space is a problem, or a handheld application is needed, as is the case of the wi-fi repeater on a Phantom Vision 2.
Â
*Important*
ÂIf you choose a LHCP directional antenna like this one,
you can use it with the STOCK PV2 (which mounts LHCP antennas).
If you want to use this for analog video trasmission please select a LHCP omnidirectional antenna like our LHCP pinwheel to be on the trasmitting side.
Also this antenna needs a U.FL to RP-SMA FEMALE Â extension cable which we do carry in our store.
Diameter : 7cm (2 3/4″)
Height: 4cm (1 1/2″)
Weight: 50gr
SKU: fpv-03
