FatShark compatible 4 miles kit
Note: Please select the plug you want before adding the product to cart.
$64.00
This kit will allow you to fly up to 7km or 4 miles if used in conjunction with a good diversity receiver like Furious true d and similar setups. The omni -directional antenna is longer than others to clear the pilot’s head and has been tuned to perfection. The Helix has 12dBi gain and has to be aimed within 65 degrees in the copter’s direction in order to have the best reception possible. Moving your head from side to side a bit will usually allow you to zero in on the copter’s direction.
Made and tuned individually at FPVLR factory.
| Plug Type | SMA Male, RP SMA Male |
|---|
Based on 0 reviews
Be the first to review “FatShark compatible 4 miles kit”
Related products
-
5.8GHz FPV Antennas
RHCP 5.8GHz Parasitic Disk Helix 9.3dBi-Fatshark mount- For 3-4km racing quad
This is a new development for FPV antennas. It’s a 2.75 turns helix, the turns are more closely spaced than a conventional helix, and it uses a parasitic disk to achieve higher gain (9.3dBi) and better axial ratio compared to a regular helix.
The result is a very compact moderately directional antenna with very good efficiency, and same gain as a 3 turns conventional helix. The total length is less than half that of a comparable 3 turns helix, which is slightly more than a linear patch antenna which shines if attached directly to your FPV goggles. The ease of aiming this is unbelievable it feels almost as an omni when flying your course nearby and it becomes slightly directional with very wide beam width when going far. We have taking our racing quad to 3-4km with a 200mw VTX and this antenna.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-13 -
5.8GHz FPV Antennas
RHCP 5.8 GHZ 4 -1/4 turns Helix
This Helix has a lower gain, as compared to our 8 turn one, and can be used in place of a patch for Circular Polarization. with a gain between 6.5-8 dbi , it can be used without a tracker, just aim in the general direction of flight! It can be also made with a 90° connector for mounting to the fatshark and aim it by facing the model.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-08 -
5.8GHz FPV Antennas
RHCP 5.8 GHZ tx Pinwheel 90° SMA
A single tx pinwheel for 5.8Ghz. This antenna comes only with a 90° connector, for straight connector please select the proper item in the list. This one works very well with our 5.8 helicals….
After much testing and reports by customers I can say it outperforms most of the cp antennas out there.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-10 -
5.8GHz FPV Antennas
RHCP 5.8 GHZ PinWheel set 1.7dBi
This antenna set works quite well, and it does provide improved video between 1-2 km on Hobbyking/Foxtec system (choose RP-SMA male connectors), or on Fatshark/ImmersionRC systems (choose SMA maleconnectors)
Range may vary, one customer claimed a record distance of 5.5km with just fatshark attitude + 600mw irc transmitter and this pair of antennas.
These pinwheels can be used also with our 8 turn Helical for ranges up to 10KM* (400mw foxtec tx + rc305 rx)
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-07
There are no reviews yet.