1.2-1.3GHz FPV Antennas
Showing all 5 results
-
1.2-1.3GHz FPV Antennas
LHCP 1.2GHz Pinwheel
Same gain and performance as our famouse 1.7 dBi Pinwheel, but this is LEFT HAND CIRCULAR POLARIZED (LHCP).
It’s only to be used with other LHCP antennas, and will not work with other brand RHCP offerings.
Note: Please select the plug you want before adding the product to cart.
SKU: n/a -
1.2-1.3GHz FPV Antennas
RHCP 1.2 Ghz 7.5 Turn Helix
Our latest addition to the CP antenna line. This antenna kicks butt! Extremely wide band, it will work from 980mhz up to 1280 mhz with SWR being very low at 1080, 1120, 1160 and 1200. It stays below 1.2:1 on all these 4 frequencies, and it stays below 1.6:1 on 980mhz and 1280mhz.
This antenna has reached distances up to 63km and has successfully been used for college balloon launch to the stratosphere.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-26 -
1.2-1.3GHz FPV Antennas
RHCP 1.2-1.3 Ghz Pinwheel 90° SMA
This is a single Pinwheel antenna for 1.2-1.3 ghz.
The one in the picture is for 1280mhz specifically.
Please specify Frequency /Channel under order notes in checkout.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-23 -
1.2-1.3GHz FPV Antennas
RHCP 1.2-1.3-900 pinwheel set (CRASHPROOF)
This set is good for 1.2-1.3 and even 900mhz frequencies. All you need to do is specify the correct frequency and it will be sized accordingly.
One antenna comes with 90° connector, the other one comes with a straight connector. If you need both with 90° connectors please select 2 pcs of the single antenna.
All 1.2 pinwheels now incorporate our well proven “CRASHPROOF” system, which consists of a CNC cut copper cross with a hole in the middle. The coaxial cable is inserted in the cross and soldered to it. The “petals” are then soldered to the 4 leads of the cross. A generous amount of epoxy is then poured over and around this solder joint and than the wires are “dipped” in black plasti-dip which is RF transparent and protects the copper plating of the steel wires.
Please specify Frequency/Channel under order notes in checkout.
e steel wires.
Note: Please select the plug you want before adding the product to cart.
SKU: fpv-22
