2 hand built and hand tuned “Bazooka” dipoles for people using the linear Itelite patch antenna **NOTE** – the new
*NEW VERSION 10-21-2014" This kit includes everything to mod both the wi-fi (fpv performance) and the rc controller (how far you can control your P2V/ P2V+) with only minimal modifications to the wi-fi extender and the radio control transmitter. It does not require any modifications to the phantom itself Installation instructions are here : http://www.phantompilots.com/viewtopic.php?f=54&t=27060#p249117
Same as regular crashproof pinwheel, but this is LHCP. Gain is 1.7dBi. Be careful, never mix LHCP and RHCP.
Thi kit contains all you need to upgrade the VIDEO only on the Phantom Vision Plus , 2 LHCP pinwheels, one 90 degrees and one straight, with the correct connectors and the correct extension cables to install on the Phantom. This is a Plug And Play install, a matter of unplugging the stock antennas and plugging the new cables in.
This 5.8Ghz receiver kit will increase RC range of the Itelite panel
This 2 dBi pentalobe Version 2 is the highest quality omnidirectional CP antenna you could find of any brand at any price point. Better axial ratio and favorable pattern will translate in extra 10% range over our Pinwheel antennas.
*NEW VERSION 01-27-2015" This kit includes EVERYTHING you need antenna wise to have great beamwidth on the ground and great true 360 degrees coverage around the bird. NOTE: our new pinwheels are Black in color, since our better quality coax cable is black. It includes our popular stage 2 kit plus 2 of the 2.4ghz pinwheels and relative cables to upgrade the Video and also 2 5.8GHz pinwheels for the phantom vision and vision plus receiver and needed cables. This latest version also includes the mounting kit V.2 as shown in the picture. It does not include amplifiers/boosters or batteries which can be purchased separately.
With this kit you will get -1 pinwheel 5.8GHz 90° connector -1 pinwheel 5.8GHz straight connector -2 u.fl to rp-sma cables 20cm (this is included in our stage 3 kit)
This is our longest range production antenna for 2.4GHz with 14dBi gain. Every aspect of this antenna is meticulously designed, built and tested, like the round copper reflector, PVC supports, enamel coated copper winding and wave trap matching strip. Guaranteed SWR below 1.2:1 on the Phantom vision Plus operating frequency of 2410-2440 MHz Great distances can be achieved in conjunction with a booster.
*New Version 01-27-2015" This kit contains EVERYTHING from stage 3 so in total you get - stage 3 - 2.4GHz 2.5W amplifier - 5.8GHz 2W amplifier - 3000mah batttery with 2 leads to power both amps. You can follow us on these Facebook groups Phantom 3 and Long Range FPV Mods ~~These amplifier products are available for export, military, licensed amateur radio and OEM component sales
This simple kit will allow your Phantom Vision 2 and 2+ to travel 2x to 3x as far as stock, retaining full FPV. For installation please refer to this guide: http://www.phantompilots.com/viewtopic.php?f=54&t=27060
X3 as in 3 helix antennas in one. This is going to offer the most enjoyable solution for unboosted or even double-boosted wi-fi. Guaranteed below 1.4:1 SWR in the whole operating band. The new design of this unit also includes a 5.8 GHZ 8 turns helix with 40° beam width. The 2 Half Sphere helix antennas have a combinded array beam width of 60° [email@example.com] . Enjoy your 1.5 (unboosted) range with very wide beamwidth. Or your 4km+ range with double booster (1w sunhans mimo)