This antenna combo is similar to our pupular "Bundle and Save kit", the only difference is the transmit antenna is a Pentalobe version 2 antenna. The Pentalobe offers extra gain and world class quality. You will experience video transmission with no lines and blemishes. Chat with us on Facebook reguarding your upgrades https://www.facebook.com/groups/1577806512440602/ and also here https://www.facebook.com/groups/396477587202912/
I developed this new Pentalobe V.2, which is an evolution not a revolution of a OMM optimized pinwheel. WIth slight more pitch angle an an extra lobe, gain and circularity are improved. Also this antenna is a better match to 50ohm compared to the older pentalobe.
This Helix has a lower gain, as compared to our 8 turn one, and can be used in place of a patch for Circular Polarization. with a gain between 6.5-8 dbi , it can be used without a tracker, just aim in the general direction of flight! It can be also made with a 90° connector for mounting to the fatshark and aim it by facing the model.
This is a new development for FPV antennas. It's a 2.75 turns helix, the turns are more closely spaced than a conventional helix, and it uses a parasitic disk to achieve higher gain (9.3dBi) and better axial ratio compared to a regular helix. The result is a very compact moderately directional antenna with very good efficiency, and same gain as a 3 turns conventional helix. The total length is less than half that of a comparable 3 turns helix, which is slightly more than a linear patch antenna which shines if attached directly to your FPV goggles. The ease of aiming this is unbelievable it feels almost as an omni when flying your course nearby and it becomes slightly directional with very wide beam width when going far. We have taking our racing quad to 3-4km with a 200mw VTX and this antenna.
This antenna set works quite well, and it does provide improved video between 1-2 km on Hobbyking/Foxtec system (choose RP-SMA male connectors), or on Fatshark/ImmersionRC systems (choose SMA maleconnectors) Range may vary, one customer claimed a record distance of 5.5km with just fatshark attitude + 600mw irc transmitter and this pair of antennas. These pinwheels can be used also with our 8 turn Helical for ranges up to 10KM* (400mw foxtec tx + rc305 rx)
This is a 12 turn antenna for very long flights on the 5.8 frequency. I have personally gone 10.8Km with this antenna and a 200mw foxtec tx (rc305 rx), using a pinwheel on the tx side.
This 5.8Ghz receiver kit will increase RC range of the Itelite panel
A single tx pinwheel for 5.8Ghz. This antenna comes only with a 90° connector, for straight connector please select the proper item in the list. This one works very well with our 5.8 helicals.... After much testing and reports by customers I can say it outperforms most of the cp antennas out there.
This is the LHCP version of the popular 5.8GHz pinwheel. It is compatible with the white DJI antennas which are LHCP, Always make sure you do not mix LHCP and RHCP antennas, as that would result in terrible performance.
This is a high gain 10-12dbi 8.25 turns helical for the 5.8 frequency. The antenna will be tuned to your exact channel's frequency. This will require a matching pinwheel antenna for 5.8 ghz for best performance, but can be used with spironets, CL and SPW as well. Please specify FrequencyChannel under order notes in checkout.
This set contains 1. 4.25 turns helix 5.8 GHz RHCP 1. Pinwheel with 90° connector 1. Pinwheel with straight connector