This is the new higher gain version of the popular FPVLR kit for 3DR Solo. Beamwidth is 60 degrees measured
World record antennas on Phantom 3 Pro as seen in the below images, 10.05 miles with plenty of signal left!
*Revision April, 1st 2016*- shorter mount, much lighter and smaller amplifiers, proprietary mmcx to rp-sma cables with long connector, requires
Here is a 10.5 dBi half sphere helix 2.4GHz LHCP and a proprietary FPVLR 9.3DBI parasitic disk helix 5.8ghz LHCP to give you very wide beam width and ease of aiming, yet some very usable directional gain to increase both your video and rc and telemetry about 3x vs stock antennas.
This kit contains 1 u.fl to rp-sma female cable (rg-178 coax) 9cm long (for 2.4ghz rc control antenna) 1 u.fl to rp-sma female cable (rg-178) 20 cm long for 5.8GHz wi-fi antenna (video) 1 2.4GHz Half Sphere helix 9dBi LHCP (to extend rc range) 1 5.8GHz LHCP 4.25 turns 5.8ghz helix antenna (to extend wi-fi/video range)
This kit is based on the P3 pro and Inspire 1 kit, it uses 1 LHCP + 1 RHCP 10.5dBi antennas.
These have a long history of success as you can see what our customers post on youtube (search FPVLR). They
This is the new and improved kit for PH3 Standard. the 5.8ghz has been increased to 14.5dBi so it’s quite
*SHIPS on November 27th 2016* Kit includes 2. u.fl to rp-sma female pigtail cables 2 8dBi yagi antennas, tuned to
This kit is based on FPVLR Half Sphere Helix V3, orginally designed by Donato Marcantonio at FPVLR and constantly improved. with 10dBi gain, and true circular polarization these are hard to beat. They will destroy not only linear polarized kits , but when amplified they are the only kind of antennas that eliminate cross-talk and provide cleaner video at incredible distances. Now they are individually tuned and with connector installed directly to the ground plane, they are compact, sturdy and unbeatable in every respect. Treat your DJI Mavic to the best antenna money can buy. Quick tip for the novices: You will see several attempted copies of this antenna around the web, some will claim they use "SILVER" as their winding material and promise magic. This said, don't be fooled by snake oil. Those antennas do not use a matching network and they are not well matched to 2.4ghz, also "SILVER" has better conductivity than copper which does nothing for the antenna, it just gives higher bandwidth, which is actually bad for this antenna. Once the waves leaver the copper , or silver, or steel antenna the waves have to travel in the"aether"... silver does nothing for propagation of radio waves. This antenna is already extremely wide band as it is. The only reason why the copy-cat people are using silver coated copper is that so they don't have to scrape enamel on the copper wire at the bottom for the soldering job and they can do that faster without enamel coating. Be smart! Use the best and DO compare ours with any other copies out there.
This kit has a slightly larger 5.8GHz LHCP antenna to match the CG03+ antenna polarization, total gain is 11dBi. It